EFFECTS OF STORAGE TEMPERATURE AND SUNLIGHT EXPOSURE ON THE DRINKING BOTTLED WATER
- Authors
-
-
Fatima Jamil Sarhan
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University -
Ghada Ahmed Mohammed
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University -
Huda Salah Mahdi
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University -
Hussein Ahmed Hassan
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University -
Noor Alhuda Raad Issa
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University -
Ali Kamil Kareem
College Of Engineering and Engineering Technologies, Department of Biomedical Engineering, Al Mustaqbal University
-
- Abstract
-
The importance of bottled water helps remove heavy metals and eliminate microorganisms. There are many studies on how to maintain water quality, for example continuous calibration of water, and the number of calibration times depends on the percentage of pollution at the level of the province or city. In this study, five samples were collected from different companies distributed at the governorate level. The first sample was analyzed after exposure to sunlight from 11/20/2022 to 4/3/2023. During the measurement, the temperature of the second sample reaches 30 degrees Celsius for half an hour, and the third sample is not exposed to any conditions. The results were collected and compared. The aim of this study is to design a versatile device, for example in homes or in laboratories, to monitor water quality. Using sensors, this device can measure (Total Dissolved Solids (TDS), potential of hydrogen, temperature, turbidity, and hardness). Nodemcu was used, which is linked to Thingspeak and Excel so that it can monitor telemetry samples, as well as store the read. Some properties that have not been studied can be studied, as well as the type of material used in the manufacture.
- References
-
1. K. Obiri-Danso, E. Amevor, L. Andoh, and K. Jones, “Effect of sunlight, transport and storage vessels on drinking water quality in rural Ghana,” Journal of Science and Technology (Ghana), vol. 24, no. 2. 2005. doi: 10.4314/just.v24i2.32915.
2. M. K. Jha, A. Shekhar, and M. A. Jenifer, “Assessing groundwater quality for drinking water supply using hybrid fuzzy-GIS-based water quality index,” Water Res., vol. 179, p. 115867, 2020, doi: 10.1016/j.watres.2020.115867.
3. X. Han, X. Liu, D. Gao, B. Ma, X. Gao, and M. Cheng, “Costs and benefits of the development methods of drinking water quality index: A systematic review,” Ecol. Indic., vol. 144, no. June, p. 109501, 2022, doi: 10.1016/j.ecolind.2022.109501.
4. M. Akharame, A. Ekhosuehi, F. Okolafor, and K. Sadoh, “Effects of Sunlight Exposure on the Quality Parameters of Bottled Water,” J. Appl. Sci. Environ. Manag., vol. 22, no. 5, p. 769, 2018, doi: 10.4314/jasem.v22i5.31.
5. R. Devesa and A. M. Dietrich, “Guidance for optimizing drinking water taste by adjusting mineralization as measured by total dissolved solids (TDS),” Desalination, vol. 439, no. November 2017, pp. 147–154, 2018, doi: 10.1016/j.desal.2018.04.017.
6. R. M. Hussein, B. Sen, M. Koyun, and Ali Riza Demirkiran, “Effects of Storage Temperature and Sun Light Exposure on Some Bottled Water Marketed in Kirkuk City, North Iraq,” Int. J. Eng. Technol. Manag. Res., vol. 6, no. 7, pp. 16–26, 2020, doi: 10.29121/ijetmr.v6.i7.2019.411.
7. M. Taghavi, M. H. Mohammadi, M. Radfard, Y. Fakhri, and S. Javan, “Assessment of scaling and corrosion potential of drinking water resources of Iranshahr,” MethodsX,vol. 6, pp. 278–283, 2019, doi: 10.1016/j.mex.2019.02.002.
8. J. U. Kitheka, “Salinity and salt fluxes in a polluted tropical river: The case study of the Athi river in Kenya,” J. Hydrol. Reg. Stud., vol. 24, no. July, p.100614, 2019, doi: 10.1016/j.ejrh.2019.100614.
9. P. Chatanga, V. Ntuli, E. Mugomeri, T. Keketsi, and N. V. T. Chikowore, “Situational analysis of physico-chemical, biochemical and microbiological quality of water along Mohokare River, Lesotho,” Egypt. J. Aquat. Res., vol. 45, no. 1, pp. 45–51, 2019, doi: 10.1016/j.ejar.2018.12.002.
10. D. Vashisht, A. Kumar, S. K. Mehta, and A. Ibhadon, “Analysis of emerging contaminants: A case study of the underground and drinking water samples in Chandigarh, India,” Environ. Adv., vol. 1, no. June, p. 100002, 2020, doi: 10.1016/j.envadv.2020.100002.
11. N. Kothari, J. Shreemali, P. Chakrabarti, and S. Poddar, “WITHDRAWN: Design and implementation of IoT sensor based drinking water quality measurement system,” Mater. Today Proc., no. xxxx, 2021, doi: 10.1016/j.matpr.2020.12.1142.
12. W. Thamer Al-Mayah, “Chemical and microbial health risk assessment of drinking water treatment plants in Kut City, Iraq,” Mater. Today Proc., vol. 42, pp. 3062–3067, 2021, doi: 10.1016/j.matpr.2020.12.920.
13. J. K. Ondieki, D. N. Akunga, P. N. Warutere, and O. Kenyanya, “Bacteriological and physico-chemical quality of household drinking water in Kisii Town, Kisii County, Kenya,” Heliyon, vol. 7, no. 5, p. e06937, 2021, doi: 10.1016/j.heliyon.2021.e06937.
14. T. F. Oyewusi, J. A. Osunbitan, and A. Taiwo, “Investigation into the suitability of well water near cassava processing areas for drinking and irrigation purposes,” Environ. Challenges, vol. 5, no. July, p. 100304, 2021, doi: 10.1016/j.envc.2021.100304.
15. A. A. Al-Othman, “Evaluation of the suitability of surface water from Riyadh Mainstream Saudi Arabia for a variety of uses,” Arab. J. Chem., vol. 12, no. 8, pp. 2104–2110, 2019, doi: 10.1016/j.arabjc.2015.01.001.
16. F. García-Ávila, A. Avilés-Añazco, E. Sánchez-Cordero, L. Valdiviezo-Gonzáles, and M. D. T. Ordoñez, “The challenge of improving the efficiency of drinking water treatment systems in rural areas facing changes in the raw water quality,” South African J. Chem. Eng., vol. 37, no. December 2020, pp. 141–149, 2021, doi: 10.1016/j.sajce.2021.05.010.
17. M. S. Islam, K. Nakagawa, M. Abdullah-Al-Mamun, M. A. B. Siddique, and R. Berndtsson, “Is road-side fishpond water in Bangladesh safe for human use? An assessment using water quality indices,” Environ. Challenges, vol. 6, no. August 2021, p. 100434, 2022, doi: 10.1016/j.envc.2021.100434.
18. F. Naseem et al., “Role of chemical composition of drinking water in human health of the community,” J. King Saud Univ. - Sci., vol. 34, no. 7, p. 102232, 2022, doi: 10.1016/j.jksus.2022.102232.
